C-Bus 5085EDLW-PW

The eDLT provides control and monitoring of up to 16 devices across 4 pages (4 devices per active page). Each device is controlled by a dual-action button that can provide two different control functions, depending upon which side of the button is pressed and the amount of time the button is pressed.

The left-right button functionality can be used for easy up/down dimming of a light and can also be used to cycle through fan speeds (forward or backwards) or through scenes that are stored in the eDLT. When the desired scene appears, the user needs only to stop cycling through the scenes and a moment later, the scene will activate. This feature also applies to cycling through preset radio stations when using C-Bus Multi-Room Audio (MRA).

The eDLT provides a widget on the screen adjacent to each of the dual-action buttons. The widget can contain a number of visual elements that enhance the user experience. A fixed label is set when the eDLT is configured. A dynamic label can change based on changing status on the C-Bus network. The text for each label can be located left, right or centre on the widget.

Dynamic labels can display the reading from a connected C-Bus device that uses the Measurement Application such as temperature from a temperature sensor. Other readings, such as power use, and even rainfall, can be displayed using this application. The readings can be displayed on the eDLT along with a label and other useful information such as prefix or suffix text.

A range of complimentary icons is also provided and they can optionally be applied to the left side of each widget. Some of the icons are dynamic, that is, they change state if the controlled device changes state. The widget can also display the level of the controlled device with an actual value (percentage) or with a graphical slider presentation instead of the dynamic text label.

Cover plate: pure white
Grid: white